is there a limit to the tree length? Some commands not executing despite similar ones are

[stemangiola]

I have a makeflow file with ~17K commands. Some of them at the root of the tree

dev/test_simulation/input__slope_0.5__foreignProp_0.8__S_30__whichChanging_1__run_2.rds:
        Rscript ~/PhD/deconvolution/ARMET/dev/test_simulation_makeflow_pipeline/create_input.R 0.5 0.8 30 1 2 dev/test_simulation/input__slope_0.5__foreignProp_0.8__S_30__whichChanging_1__run_2.rds

Are not executed for some reason, while other combination of parameters are. I don't understand why.

[stemangiola]

makefile_test_simulation.makeflow.makeflowlog.zip

makefile_test_simulation.zip

[stemangiola]

As you can see I have few holes in my benchmark

The workflow hangs and does not submit any more jobs, and if I interrupt and start again it hangs on starting workflow

[btovar]

Stefano, I'm going through your logs now... Ben

…

On Sun, Oct 4, 2020 at 11:56 PM Stefano Mangiola ***@***.***> wrote: As you can see I have few holes in my benchmark [image: image] <https://user-images.githubusercontent.com/7232890/95038823-d6401480-071a-11eb-8a41-694da25d81e7.png> The workflow hangs and does not submit any more jobs, and if I interrupt and start again it hangs on starting workflow — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#38 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAXQMYXP2U2FBWS5LDCBG63SJE7XTANCNFSM4SDRDF3A> .

[btovar]

Stefano, which command line are you using to run the workflows?

When you say you are changing parameters, are you also changing cores, memory, etc., or only parameters of your tasks?

[stemangiola]

Each block of tests depending on what algorithm is tested is run with different resources

here the command

makeflow -T slurm -j 100  --do-not-save-failed-output test_simulation_makeflow_pipeline/makefile_test_simulation.makeflow

[btovar]

Could you send me the log.out file from:
makeflow -T slurm -j 100 --do-not-save-failed-output test_simulation_makeflow_pipeline/makefile_test_simulation.makeflow > log.out 2>&1

[stemangiola]

parsing dev/test_simulation_makeflow_pipeline/makefile_test_simulation.makeflow...
local resources: 32 cores, 193277 MB memory, 148722940 MB disk
max running remote jobs: 100
max running local jobs: 100
checking dev/test_simulation_makeflow_pipeline/makefile_test_simulation.makeflow for consistency...
dev/test_simulation_makeflow_pipeline/makefile_test_simulation.makeflow has 38880 rules.
recovering from log file dev/test_simulation_makeflow_pipeline/makefile_test_simulation.makeflow.makeflowlog...
checking for old running or failed jobs...
checking files for unexpected changes... (use --skip-file-check to skip this step)
starting workflow....

and hangs forever

[btovar]

I forgot to add the -dall debug flag, sorry about that:

makeflow -dall -T slurm -j 100 --do-not-save-failed-output test_simulation_makeflow_pipeline/makefile_test_simulation.makeflow > log.out 2>&1

[stemangiola]

log.zip

[btovar]

Stefano, could you also send me dev/test_simulation_makeflow_pipeline/makefile_test_simulation.makeflow.batchlog?

[stemangiola]

I don't have batchlog. I have rerun the whole workflow. I think one of the issue (non consistent) is that I increased the combination in the makefile after the workflow was completed and some of the new banchmark dies not execute.

It is common to execute the whole workflow and try some some parameter combinations

[btovar]

Stefano, something that just occurred to me. Are you re-running the makeflow in place without a cleaning operation in between? It could be that makeflow is getting confused by a mismatch between the previous execution log and a newly modified makeflow.

[stemangiola]

Probably it is the case. But does cleaning lead to the deletion of the dependencies that are already completed. Of course if I delete the log everything gets deleted when the makeflow is called again

[btovar]

Yes, they will be deleted. A safer mode of operation in this case is to not modify the original file, but instead write the updates to differently named makeflow files. Then you can execute each update in sequence.

[stemangiola]

I understand, but this is not always possible in combinatorics scenario.

expand_grid(
	slope = c(-2, -1, -.5, .5, 1, 2), 
	foreign_prop = c(0, 0.5, 0.8),
	S = c(30, 60, 90),
	which_changing = 1:16,
	run = 1:5,
	method = c("ARMET", "cibersort", "llsr", "epic")
)

I can add arbitrary parameter space here with no effort. It would be great if makeflow could update the log file with the new dependencies, and just add them to the tree.

Otherwise makeflow would be suitable to only static workflows.