Add support for RP2040 with 16MB of flash

[Fede-26]

I want to add support for this board: https://it.aliexpress.com/item/1005003657583800.html.
It's a clone of the official pi pico with 16MB of flash.

I can't find how to specify the ROM size like the (pimoroni-pico-lipo-16mb)[https://github.com/rp-rs/rp-hal-boards/tree/main/boards/pimoroni-pico-lipo-16mb].

I believe this is the only change necessary, because when using the C sdk, I just need to copy the official board config and change the ROM size.

[jannic]

I don't have a board with 16MB flash to test this, but as far as I know, all you need to do is update memory.x accordingly.
However, there's currently no mechanism to have a BSP specific memory.x.

In fact, it should still work if you don't update it. You just wouldn't be able to use all that flash, but only the first 2MB.

[Fede-26]

Then why the readme (and the specific documentation in the relative directory) says

Note that if you use this crate the compiler will expect the full 16MB flash space, and so it may not work if you only have the 4MB variant.

?

If you can't change the flash size of each different bsp shouldn't the compiler expect a normal 2MB flash?

For now I think you can just change the memory.x file on the pc accordingly to the size of the flash installed.
If that's the only way to change this parameter I believe it should be written in the readme.
In this case I can make a pr later.

[ChocolateLoverRaj]

I have a black RP2040 16MB board from AliExpress. I would like to add the board to this repo, but I'm not sure how. I don't see any documentation about the board. It seems to be like the official Raspberry Pi Pico but it has a RGB LED connected to pin 23. Both the rp-pico pico_ws2812_led and waveshare_rp2040_zero_neopixel_rainbow examples work if I set the RGB pin to 23.