fix: typos raised by CodeSpell

Signed-off-by: Frederic Pillon <[email protected]>

Author: fpistm

README.md

@@ -23,11 +23,11 @@ motion sensors (humidity, temperature, pressure, accelerometer, gyroscope). The
 to SensiBLE and see sensors data. The data are also printed to the serial port.
 * Flight1: This application provides an example of usage of a NUCLEO board (it was tested with NUCLEO-F401RE, NUCLEO-L476RG, NUCLEO-L152RE) with
 X-NUCLEO-IKS01A2 or X-NUCLEO-IKS01A3, X-NUCLEO-IDB05A1 and X-NUCLEO-53L1A1 Expansion Boards. The application gather data from the sensor mounted and then communicates
-them via bluetooth to a suitable Android app (such as ST BLE Sensor). The data gathered include enviromental data (temperature, pression, humidity), 
+them via bluetooth to a suitable Android app (such as ST BLE Sensor). The data gathered include environmental data (temperature, pression, humidity), 
 distance, gesture recognition (tap and directional swipe), acceleration (with accelerometer hardware events) and a gyroscope.
 * Flight1v2: This application provides an example of usage of a NUCLEO board (it was tested with NUCLEO-F401RE) with
 X-NUCLEO-IKS01A3, X-NUCLEO-IDB05A2 and X-NUCLEO-53L1A1 Expansion Boards. The application gathers data from the sensors mounted and then communicates
-them via bluetooth to a suitable Android or iOS app (such as ST BLE Sensor). The data gathered include enviromental data (temperature, pression, humidity), 
+them via bluetooth to a suitable Android or iOS app (such as ST BLE Sensor). The data gathered include environmental data (temperature, pression, humidity), 
 distance, gesture recognition (tap and directional swipe), acceleration (with accelerometer hardware events), a gyroscope and a magnetometer. In addition, 9x sensor fusion functionality for accurate orientation detection is also available. Note that
 unlike the Flight1 application, this one makes use of the STM32duinoBLE API instead of SPBTLE-RF, and does not support X-NUCLEO-IKS01A2 boards. In addition, an up-to-date version of the STM32duinoBLE library is required, as this application uses some of the newest features.
 * IKS01A3_S2LP_P2P_Demo: This application provides a simple example of usage of two NUCLEO boards (it was tested with NUCLEO-F401RE and NUCLEO-L053R8) 

examples/BleSensors_SensiBLE/BleSensors_SensiBLE.ino

@@ -209,7 +209,7 @@ void Print_Sensors()
   SerialPort.print("Temp[C] (HTS221): ");
   SerialPort.println(temperature, 2);
   // Print LPS25 data
-  SerialPort.print("Pres[hPa]: ");
+  SerialPort.print("Press[hPa]: ");
   SerialPort.println(pressure, 2);
   SerialPort.print("TempP[C] (LPS25): ");
   SerialPort.println(temperatureP, 2);

examples/Flight1/Flight1.ino

@@ -95,7 +95,7 @@
 volatile int mems_event = 0;
 
 volatile uint8_t AccGyroMag_Enable = 0;
-volatile uint8_t Enviroment_Enable = 0;
+volatile uint8_t Environment_Enable = 0;
 volatile uint8_t Distance_Enable = 0;
 volatile uint8_t Gestures_Enable = 0;
 
@@ -360,7 +360,7 @@ fail:
       return 0;
    }
 
-   /*Update enviromental data (press*/
+   /*Update environmental data (press*/
    tBleStatus Environmental_Update(int32_t Press,uint16_t Hum,int16_t Temp)
    {
       tBleStatus ret;
@@ -656,12 +656,12 @@ fail:
    uint8_t  EnvironmentalCharSize=2; /* Size for Environmental BLE characteristic */
    uint8_t manuf_data[30] =
    {
-      2  /* lenght*/,0x0A,0x00 /* 0 dBm */, // Trasmission Power
-      8  /* lenght*/,0x09,NAME_FLIGHT1, // Complete Name
-      13 /* lenght*/ ,0xFF,0x01,/*SKD version */
+      2  /* length*/,0x0A,0x00 /* 0 dBm */, // Transmission Power
+      8  /* length*/,0x09,NAME_FLIGHT1, // Complete Name
+      13 /* length*/ ,0xFF,0x01,/*SKD version */
       0x80, /* NUCLEO-Board */
       0x02, /* Prox */
-      0xE0, /* ACC+Gyro+Mag+Pres+Hum+Temp */
+      0xE0, /* ACC+Gyro+Mag+Press+Hum+Temp */
       0x00, /* SensorFusionShort */
       0x00, /* SensorFusionFloat */
       0x00, /* BLE MAC start */
@@ -921,13 +921,13 @@ void Attribute_Modified_CB(uint16_t attr_handle, uint8_t * att_data, uint8_t dat
    {
       if (att_data[0] == 01)
       {
-         Enviroment_Enable = 1;
-         FLIGHT1_PRINTF("Enviroment enabled\n");
+         Environment_Enable = 1;
+         FLIGHT1_PRINTF("Environment enabled\n");
       }
       else if (att_data[0] == 0)
       {
-         Enviroment_Enable = 0;
-         FLIGHT1_PRINTF("Enviroment disabled\n");
+         Environment_Enable = 0;
+         FLIGHT1_PRINTF("Environment disabled\n");
       }
    }
    else if(attr_handle == GestureDetCharHandle + 2)
@@ -1169,9 +1169,9 @@ void loop()
    BTLE.update();
    if(Flight1.connected)
    {
-      //Get enviroment data
+      //Get environment data
       float humidity, temperature, pressure;
-      if (Enviroment_Enable)
+      if (Environment_Enable)
       {
          HumTemp.GetHumidity(&humidity);
 #ifdef USE_IKS01A3
@@ -1452,7 +1452,7 @@ void loop()
       }
 
       //Send all mems sensors data
-      if (Enviroment_Enable)
+      if (Environment_Enable)
       {
          Flight1.Environmental_Update(PressToSend, HumToSend, TempToSend);
          delay(30);

examples/Flight1v2/Flight1v2.ino

@@ -294,7 +294,7 @@ class Flight1Service {
       return ret;
     }
 
-    // Update enviromental data
+    // Update environmental data
     int Environmental_Update(int32_t Press, uint16_t Hum, int16_t Temp)
     {
       uint8_t pBuff[LEN_PRESS];
@@ -893,7 +893,7 @@ void loop()
   }
 
   if (envEnable) {
-    //Get enviroment data
+    //Get environment data
     float humidity, temperature, pressure;
     HumTemp.GetHumidity(&humidity);
     Temp.GetTemperature(&temperature);

examples/IKS01A3_S2LP_P2P_Demo/IKS01A3_S2LP_P2P_Demo.ino

@@ -241,7 +241,7 @@ void recv_data(void)
   SerialPort.print(*((float *)(&read_buf[0])), 2);
   SerialPort.print(" | Temp[C]: ");
   SerialPort.print(*((float *)(&read_buf[sizeof(float)])), 2);
-  SerialPort.print(" | Pres[hPa]: ");
+  SerialPort.print(" | Press[hPa]: ");
   SerialPort.print(*((float *)(&read_buf[2*sizeof(float)])), 2);
   SerialPort.print(" | Temp2[C]: ");
   SerialPort.print(*((float *)(&read_buf[3*sizeof(float)])), 2);

examples/X_NUCLEO_IKS02A1_Audio_Button/WaveEncoder.cpp

@@ -26,7 +26,7 @@ void WaveClass::header_init(uint8_t *pHeader, uint32_t SampleRate, uint32_t Bits
 
   /* Write the file length ---------------------------------------------------
   /* The sampling time: this value will be be written back at the end of the
-  *  recording opearation.
+  *  recording operation.
   *  Example: 44 Bytes = 0x000A17FC, byte[7]=0x00, byte[4]=0xFC
   */
   pHeader[4] = 0x2C;
@@ -108,7 +108,7 @@ void WaveClass::header_update(uint8_t *pHeader, uint32_t *byteswritten)
 {
   /* Write the file length ----------------------------------------------------*/
   /* The sampling time: this value will be be written back at the end of the
-  recording opearation.  Example: 661500 Btyes = 0x000A17FC, byte[7]=0x00, byte[4]=0xFC */
+  recording operation.  Example: 661500 Bytes = 0x000A17FC, byte[7]=0x00, byte[4]=0xFC */
   pHeader[4] = (uint8_t) * byteswritten; //<-- man mano che scrivo salva qua dentro i byte scritti
   pHeader[5] = (uint8_t)(*byteswritten >> 8);
   pHeader[6] = (uint8_t)(*byteswritten >> 16);

examples/X_NUCLEO_IKS02A1_Audio_Button/X_NUCLEO_IKS02A1_Audio_Button.ino

@@ -51,7 +51,7 @@ void setup() {
 
   /* SD Card Initialization */
   if (!SD.begin(12000000, 10)) {
-    Serial.println("Failed to inizialize SD!\n");
+    Serial.println("Failed to initialize SD!\n");
     while(1);
   }
 
@@ -100,7 +100,7 @@ void loop() {
       }
 
       if (!(myFile = SD.open(file_name, FILE_WRITE))) {
-        Serial.println("Failed to Inizialize File\n");
+        Serial.println("Failed to initialize File\n");
         while(1);
       }