For runtime BRA test #5
Open
Conversation
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Currently, hda_dsp_stream_get/put are used to get/put the host dma. However, we may want to use a hda stream that both host and link dma are available. Add helper to find the hda stream and reserve/release it. Signed-off-by: Bard Liao <[email protected]>
SoundWire BPT stream needs to use link and host DMAs. Thus we need helpers to prepare and cleanup the link and host DMAs. Currently the SoundWire BPT stream uses hda_cl_prepare/cleanup helpers. It works fine because we assume the SwoundWire BPT will not run with audio streams simultaneously. The new helpers are copied from hda_cl_prepare/cleanup and add a flag to reserve the paired host and link DMAs. The new helpers will be used by both code loader and SoundWire BPT. Signed-off-by: Bard Liao <[email protected]>
…eams Currently the SoundWire BPT stream uses the paired link DMA but not reserve it. It works without any issue because we assume the SoundWire BPT will not run with audio streams simultaneously. To support simultaneous audio and BPT streams, we need to use the hda_dma_prepare/cleanup helpers to reserve the pair link host DMA. Signed-off-by: Bard Liao <[email protected]>
We should get as much as bandwidth for the BPT stream. Signed-off-by: Bard Liao <[email protected]>
The DP0 (BPT) params are computed in sdw_compute_dp0_port_params(). We should exclude the BPT stream when calculating the audio streams. Signed-off-by: Bard Liao <[email protected]>
We just need to conunt the audio stream bandwidth and BRA stream will use the remaining bandwidth. Signed-off-by: Bard Liao <[email protected]>
colume The existing code assumes the column number will not change, but it could change if curr_dr_freq changes. Calculate the new column number before checking the bandwidth to make the checking be more accurate. Signed-off-by: Bard Liao <[email protected]>
To allow BPT and audio stream work simultaneously, we need to record the hstop of the BPT stream. And use column bpt_hstop + 1 to the last column for audio streams. No function changed since bus->bpt_hstop is set to bus->params.col - 1 for now. Will update bus->audio_stream_hstart in the follow up commit. Signed-off-by: Bard Liao <[email protected]>
Update bus->bpt_hstop to record the hstop of the BPT stream. And return -EAGAIN when there is no bandwidth for the BPT stream. Signed-off-by: Bard Liao <[email protected]>
When a BRA stream is running, we should subtract the columns that is used by the BRA stream in bandwidth calculation. Signed-off-by: Bard Liao <[email protected]>
Now the SoundWire BPT stream and the audio stream can share the SoundWire bus bandwidth. However, it is still not allowed to have more than 1 BPT stream running simultaneously. Signed-off-by: Bard Liao <[email protected]>
To support BRA. Signed-off-by: Bard Liao <[email protected]>
To test BRA Signed-off-by: Bard Liao <[email protected]>
Signed-off-by: Bard Liao <[email protected]>
bardliao
pushed a commit
that referenced
this pull request
Dec 1, 2025
With CONFIG_PROVE_RCU_LIST=y and by executing $ netcat -l --sctp & $ netcat --sctp localhost & $ ss --sctp one can trigger the following Lockdep-RCU splat(s): WARNING: suspicious RCU usage 6.18.0-rc1-00093-g7f864458e9a6 #5 Not tainted ----------------------------- net/sctp/diag.c:76 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by ss/215: #0: ffff9c740828bec0 (nlk_cb_mutex-SOCK_DIAG){+.+.}-{4:4}, at: __netlink_dump_start+0x84/0x2b0 #1: ffff9c7401d72cd0 (sk_lock-AF_INET6){+.+.}-{0:0}, at: sctp_sock_dump+0x38/0x200 stack backtrace: CPU: 0 UID: 0 PID: 215 Comm: ss Not tainted 6.18.0-rc1-00093-g7f864458e9a6 #5 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5d/0x90 lockdep_rcu_suspicious.cold+0x4e/0xa3 inet_sctp_diag_fill.isra.0+0x4b1/0x5d0 sctp_sock_dump+0x131/0x200 sctp_transport_traverse_process+0x170/0x1b0 ? __pfx_sctp_sock_filter+0x10/0x10 ? __pfx_sctp_sock_dump+0x10/0x10 sctp_diag_dump+0x103/0x140 __inet_diag_dump+0x70/0xb0 netlink_dump+0x148/0x490 __netlink_dump_start+0x1f3/0x2b0 inet_diag_handler_cmd+0xcd/0x100 ? __pfx_inet_diag_dump_start+0x10/0x10 ? __pfx_inet_diag_dump+0x10/0x10 ? __pfx_inet_diag_dump_done+0x10/0x10 sock_diag_rcv_msg+0x18e/0x320 ? __pfx_sock_diag_rcv_msg+0x10/0x10 netlink_rcv_skb+0x4d/0x100 netlink_unicast+0x1d7/0x2b0 netlink_sendmsg+0x203/0x450 ____sys_sendmsg+0x30c/0x340 ___sys_sendmsg+0x94/0xf0 __sys_sendmsg+0x83/0xf0 do_syscall_64+0xbb/0x390 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... </TASK> Fixes: 8f840e4 ("sctp: add the sctp_diag.c file") Signed-off-by: Stefan Wiehler <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Acked-by: Xin Long <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
bardliao
pushed a commit
that referenced
this pull request
Dec 1, 2025
Michael Chan says: ==================== bnxt_en: Bug fixes Patches 1, 3, and 4 are bug fixes related to the FW log tracing driver coredump feature recently added in 6.13. Patch #1 adds the necessary call to shutdown the FW logging DMA during PCI shutdown. Patch #3 fixes a possible null pointer derefernce when using early versions of the FW with this feature. Patch #4 adds the coredump header information unconditionally to make it more robust. Patch #2 fixes a possible memory leak during PTP shutdown. Patch #5 eliminates a dmesg warning when doing devlink reload. ==================== Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
bardliao
pushed a commit
that referenced
this pull request
Dec 1, 2025
On completion of i915_vma_pin_ww(), a synchronous variant of dma_fence_work_commit() is called. When pinning a VMA to GGTT address space on a Cherry View family processor, or on a Broxton generation SoC with VTD enabled, i.e., when stop_machine() is then called from intel_ggtt_bind_vma(), that can potentially lead to lock inversion among reservation_ww and cpu_hotplug locks. [86.861179] ====================================================== [86.861193] WARNING: possible circular locking dependency detected [86.861209] 6.15.0-rc5-CI_DRM_16515-gca0305cadc2d+ #1 Tainted: G U [86.861226] ------------------------------------------------------ [86.861238] i915_module_loa/1432 is trying to acquire lock: [86.861252] ffffffff83489090 (cpu_hotplug_lock){++++}-{0:0}, at: stop_machine+0x1c/0x50 [86.861290] but task is already holding lock: [86.861303] ffffc90002e0b4c8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915] [86.862233] which lock already depends on the new lock. [86.862251] the existing dependency chain (in reverse order) is: [86.862265] -> #5 (reservation_ww_class_mutex){+.+.}-{3:3}: [86.862292] dma_resv_lockdep+0x19a/0x390 [86.862315] do_one_initcall+0x60/0x3f0 [86.862334] kernel_init_freeable+0x3cd/0x680 [86.862353] kernel_init+0x1b/0x200 [86.862369] ret_from_fork+0x47/0x70 [86.862383] ret_from_fork_asm+0x1a/0x30 [86.862399] -> #4 (reservation_ww_class_acquire){+.+.}-{0:0}: [86.862425] dma_resv_lockdep+0x178/0x390 [86.862440] do_one_initcall+0x60/0x3f0 [86.862454] kernel_init_freeable+0x3cd/0x680 [86.862470] kernel_init+0x1b/0x200 [86.862482] ret_from_fork+0x47/0x70 [86.862495] ret_from_fork_asm+0x1a/0x30 [86.862509] -> #3 (&mm->mmap_lock){++++}-{3:3}: [86.862531] down_read_killable+0x46/0x1e0 [86.862546] lock_mm_and_find_vma+0xa2/0x280 [86.862561] do_user_addr_fault+0x266/0x8e0 [86.862578] exc_page_fault+0x8a/0x2f0 [86.862593] asm_exc_page_fault+0x27/0x30 [86.862607] filldir64+0xeb/0x180 [86.862620] kernfs_fop_readdir+0x118/0x480 [86.862635] iterate_dir+0xcf/0x2b0 [86.862648] __x64_sys_getdents64+0x84/0x140 [86.862661] x64_sys_call+0x1058/0x2660 [86.862675] do_syscall_64+0x91/0xe90 [86.862689] entry_SYSCALL_64_after_hwframe+0x76/0x7e [86.862703] -> #2 (&root->kernfs_rwsem){++++}-{3:3}: [86.862725] down_write+0x3e/0xf0 [86.862738] kernfs_add_one+0x30/0x3c0 [86.862751] kernfs_create_dir_ns+0x53/0xb0 [86.862765] internal_create_group+0x134/0x4c0 [86.862779] sysfs_create_group+0x13/0x20 [86.862792] topology_add_dev+0x1d/0x30 [86.862806] cpuhp_invoke_callback+0x4b5/0x850 [86.862822] cpuhp_issue_call+0xbf/0x1f0 [86.862836] __cpuhp_setup_state_cpuslocked+0x111/0x320 [86.862852] __cpuhp_setup_state+0xb0/0x220 [86.862866] topology_sysfs_init+0x30/0x50 [86.862879] do_one_initcall+0x60/0x3f0 [86.862893] kernel_init_freeable+0x3cd/0x680 [86.862908] kernel_init+0x1b/0x200 [86.862921] ret_from_fork+0x47/0x70 [86.862934] ret_from_fork_asm+0x1a/0x30 [86.862947] -> #1 (cpuhp_state_mutex){+.+.}-{3:3}: [86.862969] __mutex_lock+0xaa/0xed0 [86.862982] mutex_lock_nested+0x1b/0x30 [86.862995] __cpuhp_setup_state_cpuslocked+0x67/0x320 [86.863012] __cpuhp_setup_state+0xb0/0x220 [86.863026] page_alloc_init_cpuhp+0x2d/0x60 [86.863041] mm_core_init+0x22/0x2d0 [86.863054] start_kernel+0x576/0xbd0 [86.863068] x86_64_start_reservations+0x18/0x30 [86.863084] x86_64_start_kernel+0xbf/0x110 [86.863098] common_startup_64+0x13e/0x141 [86.863114] -> #0 (cpu_hotplug_lock){++++}-{0:0}: [86.863135] __lock_acquire+0x1635/0x2810 [86.863152] lock_acquire+0xc4/0x2f0 [86.863166] cpus_read_lock+0x41/0x100 [86.863180] stop_machine+0x1c/0x50 [86.863194] bxt_vtd_ggtt_insert_entries__BKL+0x3b/0x60 [i915] [86.863987] intel_ggtt_bind_vma+0x43/0x70 [i915] [86.864735] __vma_bind+0x55/0x70 [i915] [86.865510] fence_work+0x26/0xa0 [i915] [86.866248] fence_notify+0xa1/0x140 [i915] [86.866983] __i915_sw_fence_complete+0x8f/0x270 [i915] [86.867719] i915_sw_fence_commit+0x39/0x60 [i915] [86.868453] i915_vma_pin_ww+0x462/0x1360 [i915] [86.869228] i915_vma_pin.constprop.0+0x133/0x1d0 [i915] [86.870001] initial_plane_vma+0x307/0x840 [i915] [86.870774] intel_initial_plane_config+0x33f/0x670 [i915] [86.871546] intel_display_driver_probe_nogem+0x1c6/0x260 [i915] [86.872330] i915_driver_probe+0x7fa/0xe80 [i915] [86.873057] i915_pci_probe+0xe6/0x220 [i915] [86.873782] local_pci_probe+0x47/0xb0 [86.873802] pci_device_probe+0xf3/0x260 [86.873817] really_probe+0xf1/0x3c0 [86.873833] __driver_probe_device+0x8c/0x180 [86.873848] driver_probe_device+0x24/0xd0 [86.873862] __driver_attach+0x10f/0x220 [86.873876] bus_for_each_dev+0x7f/0xe0 [86.873892] driver_attach+0x1e/0x30 [86.873904] bus_add_driver+0x151/0x290 [86.873917] driver_register+0x5e/0x130 [86.873931] __pci_register_driver+0x7d/0x90 [86.873945] i915_pci_register_driver+0x23/0x30 [i915] [86.874678] i915_init+0x37/0x120 [i915] [86.875347] do_one_initcall+0x60/0x3f0 [86.875369] do_init_module+0x97/0x2a0 [86.875385] load_module+0x2c54/0x2d80 [86.875398] init_module_from_file+0x96/0xe0 [86.875413] idempotent_init_module+0x117/0x330 [86.875426] __x64_sys_finit_module+0x77/0x100 [86.875440] x64_sys_call+0x24de/0x2660 [86.875454] do_syscall_64+0x91/0xe90 [86.875470] entry_SYSCALL_64_after_hwframe+0x76/0x7e [86.875486] other info that might help us debug this: [86.875502] Chain exists of: cpu_hotplug_lock --> reservation_ww_class_acquire --> reservation_ww_class_mutex [86.875539] Possible unsafe locking scenario: [86.875552] CPU0 CPU1 [86.875563] ---- ---- [86.875573] lock(reservation_ww_class_mutex); [86.875588] lock(reservation_ww_class_acquire); [86.875606] lock(reservation_ww_class_mutex); [86.875624] rlock(cpu_hotplug_lock); [86.875637] *** DEADLOCK *** [86.875650] 3 locks held by i915_module_loa/1432: [86.875663] #0: ffff888101f5c1b0 (&dev->mutex){....}-{3:3}, at: __driver_attach+0x104/0x220 [86.875699] #1: ffffc90002e0b4a0 (reservation_ww_class_acquire){+.+.}-{0:0}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915] [86.876512] #2: ffffc90002e0b4c8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915] [86.877305] stack backtrace: [86.877326] CPU: 0 UID: 0 PID: 1432 Comm: i915_module_loa Tainted: G U 6.15.0-rc5-CI_DRM_16515-gca0305cadc2d+ #1 PREEMPT(voluntary) [86.877334] Tainted: [U]=USER [86.877336] Hardware name: /NUC5CPYB, BIOS PYBSWCEL.86A.0079.2020.0420.1316 04/20/2020 [86.877339] Call Trace: [86.877344] <TASK> [86.877353] dump_stack_lvl+0x91/0xf0 [86.877364] dump_stack+0x10/0x20 [86.877369] print_circular_bug+0x285/0x360 [86.877379] check_noncircular+0x135/0x150 [86.877390] __lock_acquire+0x1635/0x2810 [86.877403] lock_acquire+0xc4/0x2f0 [86.877408] ? stop_machine+0x1c/0x50 [86.877422] ? __pfx_bxt_vtd_ggtt_insert_entries__cb+0x10/0x10 [i915] [86.878173] cpus_read_lock+0x41/0x100 [86.878182] ? stop_machine+0x1c/0x50 [86.878191] ? __pfx_bxt_vtd_ggtt_insert_entries__cb+0x10/0x10 [i915] [86.878916] stop_machine+0x1c/0x50 [86.878927] bxt_vtd_ggtt_insert_entries__BKL+0x3b/0x60 [i915] [86.879652] intel_ggtt_bind_vma+0x43/0x70 [i915] [86.880375] __vma_bind+0x55/0x70 [i915] [86.881133] fence_work+0x26/0xa0 [i915] [86.881851] fence_notify+0xa1/0x140 [i915] [86.882566] __i915_sw_fence_complete+0x8f/0x270 [i915] [86.883286] i915_sw_fence_commit+0x39/0x60 [i915] [86.884003] i915_vma_pin_ww+0x462/0x1360 [i915] [86.884756] ? i915_vma_pin.constprop.0+0x6c/0x1d0 [i915] [86.885513] i915_vma_pin.constprop.0+0x133/0x1d0 [i915] [86.886281] initial_plane_vma+0x307/0x840 [i915] [86.887049] intel_initial_plane_config+0x33f/0x670 [i915] [86.887819] intel_display_driver_probe_nogem+0x1c6/0x260 [i915] [86.888587] i915_driver_probe+0x7fa/0xe80 [i915] [86.889293] ? mutex_unlock+0x12/0x20 [86.889301] ? drm_privacy_screen_get+0x171/0x190 [86.889308] ? acpi_dev_found+0x66/0x80 [86.889321] i915_pci_probe+0xe6/0x220 [i915] [86.890038] local_pci_probe+0x47/0xb0 [86.890049] pci_device_probe+0xf3/0x260 [86.890058] really_probe+0xf1/0x3c0 [86.890067] __driver_probe_device+0x8c/0x180 [86.890072] driver_probe_device+0x24/0xd0 [86.890078] __driver_attach+0x10f/0x220 [86.890083] ? __pfx___driver_attach+0x10/0x10 [86.890088] bus_for_each_dev+0x7f/0xe0 [86.890097] driver_attach+0x1e/0x30 [86.890101] bus_add_driver+0x151/0x290 [86.890107] driver_register+0x5e/0x130 [86.890113] __pci_register_driver+0x7d/0x90 [86.890119] i915_pci_register_driver+0x23/0x30 [i915] [86.890833] i915_init+0x37/0x120 [i915] [86.891482] ? __pfx_i915_init+0x10/0x10 [i915] [86.892135] do_one_initcall+0x60/0x3f0 [86.892145] ? __kmalloc_cache_noprof+0x33f/0x470 [86.892157] do_init_module+0x97/0x2a0 [86.892164] load_module+0x2c54/0x2d80 [86.892168] ? __kernel_read+0x15c/0x300 [86.892185] ? kernel_read_file+0x2b1/0x320 [86.892195] init_module_from_file+0x96/0xe0 [86.892199] ? init_module_from_file+0x96/0xe0 [86.892211] idempotent_init_module+0x117/0x330 [86.892224] __x64_sys_finit_module+0x77/0x100 [86.892230] x64_sys_call+0x24de/0x2660 [86.892236] do_syscall_64+0x91/0xe90 [86.892243] ? irqentry_exit+0x77/0xb0 [86.892249] ? sysvec_apic_timer_interrupt+0x57/0xc0 [86.892256] entry_SYSCALL_64_after_hwframe+0x76/0x7e [86.892261] RIP: 0033:0x7303e1b2725d [86.892271] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8b bb 0d 00 f7 d8 64 89 01 48 [86.892276] RSP: 002b:00007ffddd1fdb38 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [86.892281] RAX: ffffffffffffffda RBX: 00005d771d88fd90 RCX: 00007303e1b2725d [86.892285] RDX: 0000000000000000 RSI: 00005d771d893aa0 RDI: 000000000000000c [86.892287] RBP: 00007ffddd1fdbf0 R08: 0000000000000040 R09: 00007ffddd1fdb80 [86.892289] R10: 00007303e1c03b20 R11: 0000000000000246 R12: 00005d771d893aa0 [86.892292] R13: 0000000000000000 R14: 00005d771d88f0d0 R15: 00005d771d895710 [86.892304] </TASK> Call asynchronous variant of dma_fence_work_commit() in that case. v3: Provide more verbose in-line comment (Andi), - mention target environments in commit message. Fixes: 7d1c261 ("drm/i915: Take reservation lock around i915_vma_pin.") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14985 Cc: Andi Shyti <[email protected]> Signed-off-by: Janusz Krzysztofik <[email protected]> Reviewed-by: Sebastian Brzezinka <[email protected]> Reviewed-by: Krzysztof Karas <[email protected]> Acked-by: Andi Shyti <[email protected]> Signed-off-by: Andi Shyti <[email protected]> Link: https://lore.kernel.org/r/[email protected] (cherry picked from commit 648ef13) Signed-off-by: Rodrigo Vivi <[email protected]>
bardliao
pushed a commit
that referenced
this pull request
Jan 23, 2026
The GPIO controller is configured as non-sleeping but it uses generic
pinctrl helpers which use a mutex for synchronization.
This can cause the following lockdep splat with shared GPIOs enabled on
boards which have multiple devices using the same GPIO:
BUG: sleeping function called from invalid context at
kernel/locking/mutex.c:591
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 12, name:
kworker/u16:0
preempt_count: 1, expected: 0
RCU nest depth: 0, expected: 0
6 locks held by kworker/u16:0/12:
#0: ffff0001f0018d48 ((wq_completion)events_unbound#2){+.+.}-{0:0},
at: process_one_work+0x18c/0x604
#1: ffff8000842dbdf0 (deferred_probe_work){+.+.}-{0:0}, at:
process_one_work+0x1b4/0x604
#2: ffff0001f18498f8 (&dev->mutex){....}-{4:4}, at:
__device_attach+0x38/0x1b0
#3: ffff0001f75f1e90 (&gdev->srcu){.+.?}-{0:0}, at:
gpiod_direction_output_raw_commit+0x0/0x360
#4: ffff0001f46e3db8 (&shared_desc->spinlock){....}-{3:3}, at:
gpio_shared_proxy_direction_output+0xd0/0x144 [gpio_shared_proxy]
#5: ffff0001f180ee90 (&gdev->srcu){.+.?}-{0:0}, at:
gpiod_direction_output_raw_commit+0x0/0x360
irq event stamp: 81450
hardirqs last enabled at (81449): [<ffff8000813acba4>]
_raw_spin_unlock_irqrestore+0x74/0x78
hardirqs last disabled at (81450): [<ffff8000813abfb8>]
_raw_spin_lock_irqsave+0x84/0x88
softirqs last enabled at (79616): [<ffff8000811455fc>]
__alloc_skb+0x17c/0x1e8
softirqs last disabled at (79614): [<ffff8000811455fc>]
__alloc_skb+0x17c/0x1e8
CPU: 2 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted
6.19.0-rc4-next-20260105+ #11975 PREEMPT
Hardware name: Hardkernel ODROID-M1 (DT)
Workqueue: events_unbound deferred_probe_work_func
Call trace:
show_stack+0x18/0x24 (C)
dump_stack_lvl+0x90/0xd0
dump_stack+0x18/0x24
__might_resched+0x144/0x248
__might_sleep+0x48/0x98
__mutex_lock+0x5c/0x894
mutex_lock_nested+0x24/0x30
pinctrl_get_device_gpio_range+0x44/0x128
pinctrl_gpio_direction+0x3c/0xe0
pinctrl_gpio_direction_output+0x14/0x20
rockchip_gpio_direction_output+0xb8/0x19c
gpiochip_direction_output+0x38/0x94
gpiod_direction_output_raw_commit+0x1d8/0x360
gpiod_direction_output_nonotify+0x7c/0x230
gpiod_direction_output+0x34/0xf8
gpio_shared_proxy_direction_output+0xec/0x144 [gpio_shared_proxy]
gpiochip_direction_output+0x38/0x94
gpiod_direction_output_raw_commit+0x1d8/0x360
gpiod_direction_output_nonotify+0x7c/0x230
gpiod_configure_flags+0xbc/0x480
gpiod_find_and_request+0x1a0/0x574
gpiod_get_index+0x58/0x84
devm_gpiod_get_index+0x20/0xb4
devm_gpiod_get_optional+0x18/0x30
rockchip_pcie_probe+0x98/0x380
platform_probe+0x5c/0xac
really_probe+0xbc/0x298
Fixes: 936ee26 ("gpio/rockchip: add driver for rockchip gpio")
Cc: [email protected]
Reported-by: Marek Szyprowski <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Acked-by: Heiko Stuebner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bartosz Golaszewski <[email protected]>
bardliao
pushed a commit
that referenced
this pull request
Feb 3, 2026
…itives The "valid" readout delay between the two reads of the watchdog is larger than the valid delta between the resulting watchdog and clocksource intervals, which results in false positive watchdog results. Assume TSC is the clocksource and HPET is the watchdog and both have a uncertainty margin of 250us (default). The watchdog readout does: 1) wdnow = read(HPET); 2) csnow = read(TSC); 3) wdend = read(HPET); The valid window for the delta between #1 and #3 is calculated by the uncertainty margins of the watchdog and the clocksource: m = 2 * watchdog.uncertainty_margin + cs.uncertainty margin; which results in 750us for the TSC/HPET case. The actual interval comparison uses a smaller margin: m = watchdog.uncertainty_margin + cs.uncertainty margin; which results in 500us for the TSC/HPET case. That means the following scenario will trigger the watchdog: Watchdog cycle N: 1) wdnow[N] = read(HPET); 2) csnow[N] = read(TSC); 3) wdend[N] = read(HPET); Assume the delay between #1 and #2 is 100us and the delay between #1 and Watchdog cycle N + 1: 4) wdnow[N + 1] = read(HPET); 5) csnow[N + 1] = read(TSC); 6) wdend[N + 1] = read(HPET); If the delay between #4 and thesofproject#6 is within the 750us margin then any delay between #4 and #5 which is larger than 600us will fail the interval check and mark the TSC unstable because the intervals are calculated against the previous value: wd_int = wdnow[N + 1] - wdnow[N]; cs_int = csnow[N + 1] - csnow[N]; Putting the above delays in place this results in: cs_int = (wdnow[N + 1] + 610us) - (wdnow[N] + 100us); -> cs_int = wd_int + 510us; which is obviously larger than the allowed 500us margin and results in marking TSC unstable. Fix this by using the same margin as the interval comparison. If the delay between two watchdog reads is larger than that, then the readout was either disturbed by interconnect congestion, NMIs or SMIs. Fixes: 4ac1dd3 ("clocksource: Set cs_watchdog_read() checks based on .uncertainty_margin") Reported-by: Daniel J Blueman <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Paul E. McKenney <[email protected]> Tested-by: Paul E. McKenney <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/ Link: https://patch.msgid.link/87bjjxc9dq.ffs@tglx
bardliao
pushed a commit
that referenced
this pull request
Feb 3, 2026
When one iio device is a consumer of another, it is possible that
the ->info_exist_lock of both ends up being taken when reading the
value of the consumer device.
Since they currently belong to the same lockdep class (being
initialized in a single location with mutex_init()), that results in a
lockdep warning
CPU0
----
lock(&iio_dev_opaque->info_exist_lock);
lock(&iio_dev_opaque->info_exist_lock);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by sensors/414:
#0: c31fd6dc (&p->lock){+.+.}-{3:3}, at: seq_read_iter+0x44/0x4e4
#1: c4f5a1c4 (&of->mutex){+.+.}-{3:3}, at: kernfs_seq_start+0x1c/0xac
#2: c2827548 (kn->active#34){.+.+}-{0:0}, at: kernfs_seq_start+0x30/0xac
#3: c1dd2b6 (&iio_dev_opaque->info_exist_lock){+.+.}-{3:3}, at: iio_read_channel_processed_scale+0x24/0xd8
stack backtrace:
CPU: 0 UID: 0 PID: 414 Comm: sensors Not tainted 6.17.11 #5 NONE
Hardware name: Generic AM33XX (Flattened Device Tree)
Call trace:
unwind_backtrace from show_stack+0x10/0x14
show_stack from dump_stack_lvl+0x44/0x60
dump_stack_lvl from print_deadlock_bug+0x2b8/0x334
print_deadlock_bug from __lock_acquire+0x13a4/0x2ab0
__lock_acquire from lock_acquire+0xd0/0x2c0
lock_acquire from __mutex_lock+0xa0/0xe8c
__mutex_lock from mutex_lock_nested+0x1c/0x24
mutex_lock_nested from iio_read_channel_raw+0x20/0x6c
iio_read_channel_raw from rescale_read_raw+0x128/0x1c4
rescale_read_raw from iio_channel_read+0xe4/0xf4
iio_channel_read from iio_read_channel_processed_scale+0x6c/0xd8
iio_read_channel_processed_scale from iio_hwmon_read_val+0x68/0xbc
iio_hwmon_read_val from dev_attr_show+0x18/0x48
dev_attr_show from sysfs_kf_seq_show+0x80/0x110
sysfs_kf_seq_show from seq_read_iter+0xdc/0x4e4
seq_read_iter from vfs_read+0x238/0x2e4
vfs_read from ksys_read+0x6c/0xec
ksys_read from ret_fast_syscall+0x0/0x1c
Just as the mlock_key already has its own lockdep class, add a
lock_class_key for the info_exist mutex.
Note that this has in theory been a problem since before IIO first
left staging, but it only occurs when a chain of consumers is in use
and that is not often done.
Fixes: ac917a8 ("staging:iio:core set the iio_dev.info pointer to null on unregister under lock.")
Signed-off-by: Rasmus Villemoes <[email protected]>
Reviewed-by: Peter Rosin <[email protected]>
Cc: <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
bardliao
pushed a commit
that referenced
this pull request
Feb 3, 2026
The `COMEDI_RANGEINFO` ioctl does not work properly for subdevice indices above 15. Currently, the only in-tree COMEDI drivers that support more than 16 subdevices are the "8255" driver and the "comedi_bond" driver. Making the ioctl work for subdevice indices up to 255 is achievable. It needs minor changes to the handling of the `COMEDI_RANGEINFO` and `COMEDI_CHANINFO` ioctls that should be mostly harmless to user-space, apart from making them less broken. Details follow... The `COMEDI_RANGEINFO` ioctl command gets the list of supported ranges (usually with units of volts or milliamps) for a COMEDI subdevice or channel. (Only some subdevices have per-channel range tables, indicated by the `SDF_RANGETYPE` flag in the subdevice information.) It uses a `range_type` value and a user-space pointer, both supplied by user-space, but the `range_type` value should match what was obtained using the `COMEDI_CHANINFO` ioctl (if the subdevice has per-channel range tables) or `COMEDI_SUBDINFO` ioctl (if the subdevice uses a single range table for all channels). Bits 15 to 0 of the `range_type` value contain the length of the range table, which is the only part that user-space should care about (so it can use a suitably sized buffer to fetch the range table). Bits 23 to 16 store the channel index, which is assumed to be no more than 255 if the subdevice has per-channel range tables, and is set to 0 if the subdevice has a single range table. For `range_type` values produced by the `COMEDI_SUBDINFO` ioctl, bits 31 to 24 contain the subdevice index, which is assumed to be no more than 255. But for `range_type` values produced by the `COMEDI_CHANINFO` ioctl, bits 27 to 24 contain the subdevice index, which is assumed to be no more than 15, and bits 31 to 28 contain the COMEDI device's minor device number for some unknown reason lost in the mists of time. The `COMEDI_RANGEINFO` ioctl extract the length from bits 15 to 0 of the user-supplied `range_type` value, extracts the channel index from bits 23 to 16 (only used if the subdevice has per-channel range tables), extracts the subdevice index from bits 27 to 24, and ignores bits 31 to 28. So for subdevice indices 16 to 255, the `COMEDI_SUBDINFO` or `COMEDI_CHANINFO` ioctl will report a `range_type` value that doesn't work with the `COMEDI_RANGEINFO` ioctl. It will either get the range table for the subdevice index modulo 16, or will fail with `-EINVAL`. To fix this, always use bits 31 to 24 of the `range_type` value to hold the subdevice index (assumed to be no more than 255). This affects the `COMEDI_CHANINFO` and `COMEDI_RANGEINFO` ioctls. There should not be anything in user-space that depends on the old, broken usage, although it may now see different values in bits 31 to 28 of the `range_type` values reported by the `COMEDI_CHANINFO` ioctl for subdevices that have per-channel subdevices. User-space should not be trying to decode bits 31 to 16 of the `range_type` values anyway. Fixes: ed9eccb ("Staging: add comedi core") Cc: [email protected] #5.17+ Signed-off-by: Ian Abbott <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.